Hot-wet gas analysis
The method of hot-wet gas analysis is widely used – in power plants, in waste incinerations, in paper, glass and cement industries and many more. A partial flow of gaseous components is withdrawn by a sampling probe and sampling pipe and led to the analyser cabinet. The sample gas is tempered at 185 °C for the whole gas path and monitored for flow and temperature. This high temperature level is necessary in order to prevent condensing of water-soluble components.
The multi-component analyser is the heart of the hot-wet measuring system analysing simultaneously up to 12 components. That includes e.g. HCL, NH3, H2O, CO, NO, NO2, CH4, SO2 and CO2. Oxygen is measured by an integrated zirconium dioxide sensor.
Our gas analysers are qualified for almost all applications. The types MCA 04 and MCA 10 passed the suitability test and got certification according to EN 15267-3 (QAL1) for European Standards. As well, US EPA CFR 40 part 60 and 75 compliance, and Environment Canada PG7 compliance. Mobile measuring equipment offers high flexibility for special situations. Test it!
Mobile multi component analyser MCA 14 m
- mobile hot-wet gas analysis system
- continuous extractive measurement up to ten IR-components and oxygen
- advanced photometer technology
- sample gas feeding with heated pump (regardless of the instrument air supply)
- integrated control system
- integrated zero gas provision
- visualisation via integrated tablet, with data logger functionality
- CSA/UL
- Zero and span calibration
Multi component analyser MCA 10
- US EPA PS18 HCI Compliant
- extractive multicomponent analysis system
- hot-wet gas analysis
- max. 11 infrared components as well as oxygen
- QAL1 certified - TÜV approved
- CSA/UL
- Zero and span calibration
Mobile multi component analyser MCA 10 m
- mobile hot-wet gas analysis system (without gas cooler)
- continuous extractive measurement up to 12 infrared components and oxygen
- advanced photometer technology
- sample gas feeding by injector
- integrated control system
- integrated zero gas provision
- visualisation via integrated tablet, with data logger functionality
- CSA/UL
- Zero and span calibration
Gas analyser MCA 04
- US EPA CFR 40 part 60 and 75 compliant, and Environment Canada PG7 compliant
- multi component analyser for extractive gas component measurement
- hot-wet gas analysis
- max. 7 infrared components as well as oxygen
- QAL1 certified - TÜV approved
- CSA/UL
- Zero and span calibration